Lokfix P80 🎉

Apply 360 degrees around the inner surface (for housings) or outer surface (for shafts). For vertical shafts, apply to the leading edge of the pin so it spreads during insertion.

Use a solvent cleaner (acetone or Loctite 7063). Remove all oil, grease, and old threadlocker. The surface must be "water-break free" (where water forms a sheet, not droplets). lokfix p80

When a shaft wears down or a bearing housing becomes ovalized, the traditional solution is often expensive: welding, machining, or replacing the entire assembly. But there is a third path—one that lives inside a small bottle. Enter . Apply 360 degrees around the inner surface (for