Washing - Machine Drain Clogged _best_

If water still backs up, the clog is deep in your plumbing. Feed a 25-foot drum auger into the standpipe. Crank slowly until you feel resistance. That’s the sludge plug. Break it, retract, and run a rinse cycle to test. The One Thing You Should Never Do Do not pour liquid drain cleaner (Drano, Liquid-Plumr) into a washing machine drain.

You hear it from the laundry room: the washing machine isn’t singing its usual end-of-cycle jingle. Instead, it’s making a thump-thump-thump sound, followed by a desperate, watery gasp. You open the lid to find your clothes sitting in a murky, soapy swamp. washing machine drain clogged

Don’t run the pump with a full tub; you’ll burn out the motor. Use a bucket or a wet/dry vacuum to remove the standing water from the drum. If water still backs up, the clog is deep in your plumbing

Locate the drain filter (usually bottom right or behind the front panel). Clean it out. Nine times out of ten, this solves the problem. That’s the sludge plug

If the filter is clean but the water still drains slowly, pour one gallon of boiling water (carefully!) mixed with one cup of white vinegar directly down the standpipe. Wait 10 minutes. The heat and acid dissolve soap scum.

A clogged drain.